Control current.
Tune illumination.
Constant-current drive controls the current supplied to the LEDs. Adjust each lighting direction to find a combination that reveals scratches and surface features.
4CH CONSTANT CURRENT CONTROLLER
Balance the light.
At the panel or from a PC.
Four constant-current channels.
Adjust the light your inspection needs, one direction at a time.
4-channel controller for hybrid lighting
PWR-HYB-Long-STD-4CH-A3
FOUR CHANNELS. ONE CONTROLLER.
4ch
Adjust each lighting direction
200mA–4A
Output current per channel
USBType B
Communication with a PC
LIGHTING CONTROL
Support your imaging conditions
with straightforward controls.
Control current.
Try a condition.
Adjust it at the panel.
Four front-panel variable controls let you adjust channels independently while observing the image of the target.
Send commands from a PC.
Integrate with the equipment.
Remote mode accepts serial communication commands. Operate from a PC via USB and adjust timing through external terminals.
MANUAL → REMOTE
Set up at the panel.
Operate from a PC.
Compare lighting directions and brightness manually, then consider PC control once the conditions are established. Discuss a configuration suited to evaluation or integration into your equipment.
- Check manuallyAdjust each channel with the front-panel controls
- Switch to remoteSelect the operating method with the mode switch
- Operate from a PCSet lighting conditions through communication commands
Confirm software support, communication commands, external-terminal wiring and timing requirements for the equipment being used.
SPECIFICATIONS
Key specifications
After confirming lighting compatibility,
we provide a quotation for the required configuration and quantity.
- Lighting / drive mode
- Continuous / constant current
- Channels
- 4
- Output current
- 200 mA to 4 A per channel
- Output voltage
- 24 V
- Manual controls
- 4 variable controls and mode switch
- External operation
- Serial communication commands
Timing adjustment through external terminals - Interfaces
- USB Type B / DVI 9-pin*
- Input power
- AC 100 V (±10%), 50/60 Hz
The stated output voltage does not mean constant-voltage drive. Confirm the lighting ratings, load conditions and connector compatibility before connection. *Connector designation follows the supplied specification and should be confirmed for the equipment.
LET'S BUILD YOUR LIGHTING SETUP
Discuss lighting and control together.
Tell us about the target, transport speed and current camera configuration.
TECHNOLOGY NOTES
Technology behind the product
Scroll horizontally to explore the articles
Lighting
Why illuminate from multiple angles? — distinguish scratches from reflections
The same scratch can look different under different lighting directions. Compare each direction to separate surface texture from the feature you need to inspect.
Power and control
Constant-current and constant-voltage LED drive — choosing a suitable supply
Constant current regulates current; constant voltage regulates voltage. Match the drive mode to the lighting circuit and distinguish it from dimming and remote operation.
RELATED PRODUCT
Hybrid lighting 300 mm
Combine high-angle, coaxial and lateral illumination to reveal the features needed for inspection.
Cables sold separately: 3 m hybrid lighting control cable HYB-CBL-Long-NOR-L3000-CN01 / communication cable COM-CBL-USB / 2 m power cable AC-CBL-C07-L2000